scurity

LED Lamp

Trends LED lights are now gathering popularity. Application on the European cars are not foreign anymore. Already sinarnya light emission, economical electricity than a bulb. Not surprisingly, so why LED flare diaplikasi also because many already implemented in new cars.

JDM Concept Community (JDMCC) bermarkas in Duri Kepa, Jakarta Barat share knowledge how to change the model sein bholam be LED. Application is done in the light sein combined with the headlight.
Penggarapannya process, according to one member JDMCC, relatively easy. Because, all that is required, starting from the resistor, the LED, PCB (board to place a component), reflector, and tin solder is available in the market. And the cost per lamp is Rp 50,000.
Next steps process;
1. Prepare materials, basic form of LED lights, solder, tin, reflector, resistor and the PCB.
2. Install LED lights on the PCB surface is circular.
3. Then, foot-foot LED disolder to connect with the PCB electrical path.
4. Prepare to install the resistor on the PCB, then disolder as in the LED.
5. After kelar LED lights installed on the PCB, install a light coconut shell that has been previously removed from the holder.
6. Once installed, install the back cover and the LED lights on ready to work sein. (Grace)